HPS grow light for commercial rooms: the Phantom 60 Series 1000 W double-ended enclosed fixture, 277-400 V, lamp sold separately. The Phantom 60 Series is a commercial 1000 W double-ended HID light with an enclosed reflector, supplied without a lamp. At its core is the Phantom PHB6024 ballast, which can be set to 600, 660, 750, 825, 1000 or 1150 W, or run under PX control. Its RJ12 0-11.5 V dimming port works with Autopilot PX2+ lighting controllers and repeats the signal down the line for 500 or more fixtures, and a 10 ft RJ12 cable and splitter are included. The ballast restrikes the lamp after a brief power cut, signals end of lamp life, shows status by LED, is RF shielded, cools through aluminum fins and is rated for damp locations. The enclosed reflector is 99.85% pure hammertone aluminum with 95% reflectivity, gives a medium spread with even PAR, and uses a ridge vent to hold the lamp at its ideal temperature; the lamp holders are K12 x 30s high-temperature type. It takes 277-400 V through an IP67 input connection with a 3 ft bare-lead cord, so it should be wired by a licensed electrician.
| Specification | Value |
|---|---|
| Brand | Phantom |
| Item number | PHRE1000277NL |
| Type | Double-ended HID, enclosed reflector |
| Ballast | PHB6024; 600-1150 W in 6 steps, PX mode |
| Dimming | RJ12 0-11.5 V, Autopilot PX2+ |
| Input | 277-400 V, IP67 connection, 3 ft bare leads |
| Reflector | 99.85% pure aluminum, 95% reflectivity |
| Lamp | Not included |
| Included | 10 ft RJ12 cable, splitter |
| Pack | Each |
| Barcode | 638104028561 |
It needs a 277-400 V circuit wired by a licensed electrician and a 1000 W double-ended lamp, which is not included. For a lamp, see the Ushio 1000 W DE HPS. For any questions about this 60 Series DE light, email us at support@groindoor.com or reach us on chat.
Everything needed to confirm fit is on this page — add it to your cart to see delivered pricing for your address.
Map fixtures to circuits before ordering, since each 1000 W light on 277-400 V draws a known load your electrician will size breakers for. Run the RJ12 cable from the controller to the first light and daisy-chain the rest. Fit lamps with gloves, holding them by the ends, before hanging fixtures.
Yes; set the ballast to 600, 660, 750 or 825 W.
No; add a 1000 W double-ended lamp such as the Ushio HiLUX GRO Pro Plus.
Autopilot PX2+ controllers through the RJ12 0-11.5 V port.
600, 660, 750, 825, 1000 or 1150 W, or PX control mode.
A licensed electrician, since it connects with 3 ft bare leads at 277-400 V.
| EACH - Height(in) | 8 |
|---|---|
| EACH - Length(in) | 28 |
| EACH - Width(in) | 15 |
| Weight (lb) | 17.49996491 |
| Height (in) | 8 |
| Width (in) | 15 |