Aqua Master Tools replacement electrode for the P110 Pro 2 meter

Aqua Master Tools P110 Pro 2 Electrode

SKU: AMT1014.2
Current Stock: 9
Lead Time: This product ships in 1-3 Business Days
$44.75
MSRP: $51.46
$44.75
— You save $6.71
Subtotal: $44.75

Free Returns

Learn More.
Aqua Master Tools replacement electrode for the P110 Pro 2 meter

Aqua Master Tools P110 Pro 2 Electrode

$51.46 $44.75

Aqua Master Tools P110 Pro 2 Electrode

$51.46 $44.75
P110 Pro 2 IP67 pH, EC + temp

Overview

P110 Pro 2 Electrode to bring a worn meter back: a direct-fit pH, EC and temperature sensor from Aqua Master Tools. When an Aqua Master Tools P110 Pro 2 starts giving slow or unstable readings that calibration no longer fixes, the sensing end has usually worn out, not the meter. This pH, EC and temperature electrode (AMT1014.2) replaces that end on the P110 Pro 2, so the body, display and buttons carry on in service. Once it is screwed in and sealed, the meter is again IP67 waterproof. Fitting takes a few minutes: undo the sealing ring under the meter, ease the old electrode out, line the recess of the new one up with the connectors, make sure the rubber seal is seated, then tighten the ring and calibrate. Published instructions call for pH 7.00 and EC 1413 solutions for that calibration.

P110 Pro 2 Electrode Features: Aqua Master Tools P110 Pro 2 Replacement Electrode

  • P110 Pro 2 only
  • pH, EC + temp sensing
  • IP67 once fitted
  • Sealing-ring fit

Aqua Master Tools AMT1014.2 Specifications

Specification Value
Brand Aqua Master Tools
Item number AMT1014.2
For meter P110 Pro 2
Waterproof rating IP67 with the electrode attached
Reads pH, EC and temperature
Calibration pH 7.00 and EC 1413 solutions
Pack Each
Barcode 8721249602306

Which Meter Does It Fit?

Order this electrode only for the P110 Pro 2 combination meter. For the other pen, see the P50 Pro electrode. For any questions about this P110 Pro 2 electrode, email us at support@groindoor.com or reach us on chat.

Everything needed to confirm fit is on this page — add it to your cart to see delivered pricing for your address.

Getting the Most From a New Electrode

Rinse the new electrode in clean water, calibrate pH first and then EC, and keep the tip wet in KCl storage solution between uses so it never dries out.

❓ Frequently Asked Questions

Does it cover EC too?

Yes; it reads pH, EC and temperature, like the one it replaces.

Will it fit other Aqua Master Tools pens?

It is made for the P110 Pro 2; other models take their own electrodes.

Is the meter still waterproof afterward?

Yes; with the electrode attached it is rated IP67.

Do I calibrate after swapping?

Yes; run a fresh calibration with pH 7.00 and EC 1413 solutions.

Where is the sealing ring?

Underneath the P110 Pro 2, where the electrode joins the meter body.

Lead Time This product ships in 1-3 Business Days
EACH - Height(in) 1.18
EACH - Length(in) 3.58
EACH - Width(in) 1.18
Height (in) 1.18
UPC 8721249602306
Width (in) 1.18
Brand Aqua Master

Related Products

Recently Viewed Products