EZ-Clone Low Pro white 32-site cloning system
EZ-Clone Low Pro white 32-site cloning system, second view

Ez-Clone Low Pro White 32 Site Cloning System

SKU: EZCL32LPWH
Current Stock: Out Of Stock
Lead Time: This product ships in 1 Business Day
$219.17
MSRP: $252.05
$219.17
— You save $32.88
Subtotal: $219.17

Free Returns

Learn More.
EZ-Clone Low Pro white 32-site cloning system, second view

Ez-Clone Low Pro White 32 Site Cloning System

$252.05 $219.17

Ez-Clone Low Pro White 32 Site Cloning System

$252.05 $219.17
32 sites White Aeroponic

Overview

This EZ cloner is the 32-site Low Pro in white, an aeroponic system that mists stems in a low, leak-resistant reservoir. The Low Pro sits four inches lower than earlier EZ-Clone models while its lid and reservoir are stronger, built from UV-protected HDPE in white. Letters and numbers molded into the lid let you track batches of cuttings, finger slots make collars easy to pull, and the reservoir has a taller lip, extended flange and drainage gutters to keep water in. The pump has an extended base plate with extra suction cups so the manifold stays upright.

EZ Cloner Features: Low Pro 32-Site, White

  • 32-site Low Pro, white
  • Molded lid labels
  • Finger slots for collar removal
  • Leak-resistant reservoir lip and gutters
  • Colored cloning collars included

EZ-Clone EZCL32LPWH Specifications

Specification Value
Brand EZ-Clone
Item number EZCL32LPWH
Sites 32
Color White
Material UV-protected HDPE
Method Aeroponic misting
Fill volume (EZ-Clone) 5 to 5.5 gallons
Reservoir temperature 70-85 F with Clear Rez
Room temperature 68-78 F
Light (EZ-Clone) Dual-tube T12 fluorescent, 40 W, 2 ft fixture, 18-24 in. above cuttings
Included Lid, reservoir, manifold, misters, pump, cloning collars in four colors
Pack Each
Barcode 953229001962

How Much Water Does the 32-Site Low Pro Hold?

EZ-Clone gives 5 to 5.5 gallons as the fill volume for the 32-site white unit; if exact volume is not needed, fill to the bottom of the manifold. Tap water is fine in most areas. With poor tap water use RO or spring water, and if using RO, mix about 75% RO with 25% tap or spring water to help pH hold steady. Clean the system thoroughly between every cycle. For half the sites in white, see the EZ-Clone Low Pro 16 white. If you have any questions about this Low Pro 32-site cloner, contact us at support@groindoor.com or through chat.

Everything needed to confirm fit is on this page — add it to your cart to see delivered pricing for your address.

What Temperatures Suit the 32-Site Low Pro?

For the 32-site white unit, EZ-Clone recommends 68 to 78 F room air, the same range it tests in, and a 70 to 85 F reservoir when using Clear Rez. See the EZ-Clone Clear Rez 16 oz.

❓ Frequently Asked Questions

How many cuttings does this white Low Pro hold?

32.

When do roots usually appear?

Soft, green and softwood cuttings often start rooting in 7 to 10 days; woody cuttings take longer.

Should the pump run all the time?

Continuous running is recommended; EZ-Clone has also seen good roots on a 30 minutes on, 30 minutes off cycle.

When are cuttings ready to move?

When the roots are at least 2 inches long.

EZ-Clone Manual and Setup Guides

UL Listed No
Lead Time This product ships in 1 Business Day
Prop 65 No
EACH - Weight(lb) 0.15
EACH - Height(in) 12.38
EACH - Length(in) 24
EACH - Width(in) 14.75
Weight (lb) 12
Height (in) 12
Width (in) 15
Brand Brand
Plant Count 32

Related Products

Recently Viewed Products