HIGHER YIELDS, FEWER PROBLEMS
The right dehumidification setup can take your indoor grow operation to the next level. Say goodbye to crop losses from molds and other pests, and say hello to peak productivity with the Quest Dehumidifier.
Quest has the most energy-efficient dehumidifiers available, using the least electricity and removing more pints of water per kWh at the widest temperature range. Quest’s innovative design also creates the lightest heat load on your HVAC, paying for itself in energy savings.
Higher Crop Yields, Less Problems
One of the biggest challenges for the indoor farming industry is creating and maintaining a stable, consistent environment for plants to flourish. Without a reliable climate, you could lose your entire crop. Once you lose control of your environment, serious crop-crushing issues begin to take hold. The two main “crop-crushers” are concerns many growers face at one time or another: powdery mildew and botrytis, more commonly known as bud rot. Either of these issues can destroy a grow and lead to lost revenue.
Proper Dehumidification Can Make All The Difference
Whether it’s a greenhouse or a hydroponic grow the same principles come into play when you’re fine-tuning a setup. For moisture control and dehumidification, the three most important aspects are proper sizing, placement, and airflow. Quest engineers developed our product offerings to allow for flexible and customizable options to address all three.
Why use a Quest Dehumidifier?
QUEST'S PATENTED TECHNOLOGY | M-CoRR™
Providing the most energy-efficeint dehumidification
The secret behind Quest’s unparalleled energy-efficiency is our patented multi-coil design, or as we like to call it: M-CoRR (short for Multi-Coil Refrigeration Recovery). You won’t find this technology anywhere else.
M-CoRR is engineered for maximum performance, allowing Quest to be the most energy-efficient and the best return on your investment, paying for itself in energy savings over time. M-CoRR’s innovative design performs better over a wider range of dew points, even at colder temperatures, and maintains capacity regardless of airflow fluctuations.
How Does Quest's M-CoRR Technology Work?
Traditional refrigerant dehumidifiers have a single refrigerant-filled evaporator coil that cools the air passing through it to extract the water from the air (because cold air holds less water). Once the air is cooled below the dew point, water condenses. Energy captured in the refrigerant during water removal is returned to the air in the form of heat at the second coil, the condenser.
The magic of Quest’s M-CoRR Technology is its multiple coils. Quest designed the typical evaporator coil into three separate refrigerant-filled coils: the pre-evaporator, evaporator, and recovery coil.
The first coil, the pre-evaporator, cools the air. The second coil, the evaporator, cools it even further to pull out the water. The third coil recovers the energy from pre-cooling the air to be recycled back into the evaporator for reuse.
What Are The Benefits Of Using M-CoRR?
Highest Efficiency. Lowest Energy Usage
Higher efficiency = lower electricity usage per pint of water removed. M-CoRR technology pulls more water out of the air per kilowatt hour than any other dehumidification technology. Period.
Less Heat Output
Inefficiency = Heat. It takes energy to run the fan and compressor in your dehumidifier. During dehumidification, this energy converts to heat that warms your room. The more energy your dehumidifier consumes, the more heat it expels. Quest dehumidifiers featuring M-CoRR technology are the most efficient dehumidifiers in the world, which means they put less heat in your environment.
More Capacity, Smaller Footprint
Your space is valuable. Dehumidifiers powered by M-CoRR are more compact. This technology averages over 20% smaller than traditional LGR dehumidification technology of the same capacity.
Wide Operating Rage. Tighter Control
Thanks to its multiple coils, M-CoRR technology equips Quest to maintain performance better than traditional dehumidification equipment, even in cooler temperatures and dew points, with less frequent and faster defrost cycles. Less time spent in defrost neutralizes spikes in temperature and relative humidity, keeping the environment consistent and, in indoor cultivations, VPD dialed in.
Which Quest Dehumidifiers feature M-CoRR?
The Quest Dehumidifiers are broken apart by the High-Efficiency Series and the Standard Overhead Series. All Quest Dehumidifiser in the High-Efficiency Series feature the M-CoRR Technology. The Overhead Series are Quest's standard units that do not feature M-CoRR. Please note: Models in the high-efficiency series can still be installed overhead if that models allows.
Click the Quest models in the list below to be taken to detailed specifications for that model.
Quest High-Efficiency Series with M-CoRR
Quest Dehumidifier 70 - Overhead Series
Controlling humidity in compact, unconditioned commercial spaces presents unique challenges. Variable temperatures and constrained placement means you need a targeted solution. That’s where the Quest 70 comes in.
This compact, economical, high performing dehumidifier has one of the widest temperature and relative humidity operating ranges we offer.
The Quest 70 dehumidifier is engineered in Madison, Wisconsin. It’s backed by a 5-year warranty. In addition, this unit meets California Title 24 requirements for both ducted (whole-home) and non-ducted (portable) installations.
Quest 70 Specifications
Water Removal 70 Pints/Day |
Efficiency 5 Pints/kWh |
Energy Factor 2.4 Liters/kWh |
Current Draw 5.1 Amps |
Power 680 Watts |
BTU (Total) 5,000 |
BTU (Heat) 3,000 |
BTU (Motor Load) 2,000 |
Water Removal 43 Pints/Day |
Efficiency 3.3 Pints/kWh |
Energy Factor 1.6 Liters/kWh |
Current Draw 4.9 Amps |
Additional Specifications Quest 70
Part Number 4033750 |
Dehumidifier Type Refrigerant Dehumidifier |
CFM 150 |
Operating Temperature 33°-100° F |
Supply Voltage 110–120 VAC, 1 Phase, 60 Hz |
Unit Dimensions 12" W x 12" H x 21.5" L |
Unit Weight 55 lb |
Control Type Onboard w/ low voltage terminal block |
Air Filter MERV Rating MERV 13 |
Air Filter Dimensions 9" x 12" x 1" |
Power Cord 110-120 VAC |
Refrigerant Type R410A |
Refrigerant Amount 15 oz |
Drain Port Connection 3/4" Threaded NPT |
Warranty 5 Year |
Quest 100 High-Efficiency Dehumidifier (with M-CoRR)
The NEW Quest 100 combines Quest’s latest technology with with the versatility and flexibility of its compact product line. This makes it the perfect dehumidifier for small projects and spaces.
M-CoRR Technology
The new Quest 100 pint dehumidifier boasts our unique M-CoRR technology. This patented multi-coil design provides the highest efficiencies available on the market, saving energy and dollars.
In addition to our industry-leading coil system, the Quest 100 features premium MERV-13 filtration, without compromising capacity or efficiency. This superior filtration helps to prevent the start or spread of bacteria, mold or other contaminants around your precious plants, equipment and crew with 65% more effectiveness than MERV-8 and 20% more effectiveness than MERV-11. MERV-13 filtration means healthier air and more control over your environment.
With a corrosion-resistant base and smaller footprint, the Quest 100 has flexible placement options, without the worry of rust, even after watering your plants or washing down your room.
The Quest 100 dehumidifier is engineered and assembled with quality in Madison, Wisconsin, USA. It’s backed by a 5-year warranty, providing you with confidence in your purchase. Wondering about energy efficiency regulations? No worries. This unit meets the California Title 24 requirements for both ducted (whole-home) and non-ducted (portable) installations.
Quest 100 Specifications
Water Removal 100 Pints/Day |
Efficiency 7.5 Pints/kWh |
Energy Factor 3.55 Liters/kWh |
Current Draw 5.0 Amps |
Power 540 Watts |
BTU (Total) 6759 |
BTU (Heat) 4768 |
BTU (Motor Load) 1990 |
Additional Specifications Quest 100
Part Number 4041870 |
Dehumidifier Type Refrigerant Dehumidifier |
CFM 280 |
Operating Temperature 56°-95° F |
Supply Voltage 115 VAC |
Unit Dimensions 24" L x 16" W x 14.5" H |
Unit Weight 60 lb |
Control Type Onboard w/ low voltage terminal block |
Air Filter MERV Rating MERV 13 |
Air Filter Dimensions 12" x 14" x 1" |
Rec. Breaker size 15 |
Power Cord 115VAC-Grounded (9?) |
Refrigerant Type R410A |
Refrigerant Amount 23 oz |
Drain Port Connection 3/4" Threaded NPT |
Fans Variable speed EC Motor |
Warranty 5 Year |
Quest Dehumidifier 105 - Overhead Series
The Quest Dual 105 is the most energy efficient dehumidifier in its class: Using only 4.9 amps, the Quest Dual 105 removes 105 pints of water per day. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.
The Quest Dual 105 dehumidifier is engineered and assembled in Madison, Wisconsin and is backed by a 5-year warranty. In addition, this unit meets California Title 24 requirements for both ducted (whole-home) and non-ducted (portable) installations.
Quest 105 Specifications
Water Removal 105 Pints/Day |
Efficiency 8.8 Pints/kWh |
Energy Factor 4.2 Liters/kWh |
Current Draw 4.9 Amps |
Power 530 Watts |
BTU (Total) 6,600 |
BTU (Heat) 5,000 |
BTU (Motor Load) 1,600 |
Water Removal 74 Pints/Day |
Efficiency 7.2 Pints/kWh |
Energy Factor 3.4 Liters/kWh |
Current Draw 3.7 Amps |
Additional Specifications for Quest 105
Part Number 4032270 |
Dehumidifier Type Refrigerant Dehumidifier |
CFM 257 |
Operating Temperature 56°-95° F |
Supply Voltage 110–120 VAC, 1 Phase, 60 Hz |
Unit Dimensions 20.25" W x 21.75" H x 38" L |
Unit Weight 140 lb |
Control Type Onboard w/ low voltage terminal block |
Air Filter MERV Rating MERV 11 |
Air Filter Dimensions 16" x 20" x 2" |
Power Cord 14ga NEMA 5-15P (10') |
Refrigerant Type R410A |
Refrigerant Amount 1 lb 10 oz |
Drain Port Connection 3/4" Threaded NPT |
Warranty 5 Year |
Quest Dehumidifier 110 - Overhead Series
The Quest Dual 110 dehumidifier is our smallest and lightest mid-size dehumidifier. It offers great water removal with easy portability — you can even hang it overhead — at an affordable price.
The Quest Dual 110 removes more water using less electricity, and will last years longer than the competition.
The Dual 110 is engineered and assembled in Madison, Wisconsin using the very best components and materials available. It’s backed by a 5-year warranty. In addition, this unit meets California Title 24 requirements for ducted (whole-home) installations.
Quest 110 Specifications
Water Removal 110 Pints/Day |
Efficiency 5.8 Pints/kWh |
Energy Factor 2.8 Liters/kWh |
Current Draw 7.4 Amps |
Power 787 Watts |
BTU (Total) 7,900 |
BTU (Heat) 5,100 |
BTU (Motor Load) 2,800 |
Additional Specifications for Quest 110
Part Number 4034220 |
Dehumidifier Type Refrigerant Dehumidifier |
CFM 365 |
Operating Temperature 56°-95° F |
Supply Voltage 110–120 VAC, 1 Phase, 60 Hz |
Unit Dimensions 14.5" W x 19.4" H x 26" L |
Unit Weight 85 lb |
Control Type Onboard controls |
Air Filter MERV Rating MERV 8 |
Air Filter Dimensions 17.5" x 14" x 1.75" |
Power Cord 115 Volt Grounded Plug (10') |
Refrigerant Type R410A |
Drain Port Connection 3/4" Threaded NPT or 5/8" Hose Barb |
Warranty 5 Year |
Quest Dehumidifier 150 - Overhead Series
The Quest Dual 150 removes almost 20 gallons a day and is is our most powerful mid-sized overhead type dehumidifier. Dollar per pint, the this unit is the most affordable professional-quality dehumidifier on the market today.
The Dual 150 is engineered and assembled in Madison, Wisconsin using the very best components and materials available.
The Quest Dual 150 dehumidifier is backed by a 5-year warranty. In addition, this unit meets California Title 24 requirements for both ducted (whole-home) installation.
Quest 150 Specifications
Water Removal 150 Pints/Day |
Efficiency 4.8 Pints/kWh |
Energy Factor 2.3 Liters/kWh |
Current Draw 11.0 Amps |
Power 1,300 Watts |
BTU (Total) 10,500 |
BTU (Heat) 6,700 |
BTU (Motor Load) 3,800 |
Additional Specifications for Quest 150
Part Number 4034230 |
Dehumidifier Type Refrigerant Dehumidifier |
CFM 430 |
Operating Temperature 56°-95° F |
Supply Voltage 110–120 VAC, 1 Phase, 60 Hz |
Unit Dimensions 14.5" W x 21" H x 26" L |
Unit Weight 95 lb |
Control Type Onboard controls |
Air Filter MERV Rating MERV 8 |
Air Filter Dimensions 17.5" x 14" x 1.75" |
Power Cord 115 Volt Grounded Plug (10') |
Refrigerant Type R410A |
Drain Port Connection 3/4" Threaded NPT or 5/8" Hose Barb |
Warranty 5 Year |
Quest Dehumidifier 155 - Overhead Series
The Quest Dual 155 dehumidifier is one of the most energy-efficient commercial dehumidifiers on the market today. Removing 155 pints of water per day, this unit can save you thousands in energy costs every year compared to the competition. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.
The Quest Dual 155 dehumidifier is engineered and assembled in Madison, Wisconsin. It’s backed by a 5-year warranty. In addition, this unit meets California Title 24 requirements for both ducted (whole-home) and non-ducted (portable) installations.
Quest 155 Specifications
Water Removal 155 Pints/Day |
Efficiency 7.3 Pints/kWh |
Energy Factor 3.5 Liters/kWh |
Current Draw 8 Amps |
Power 920 Watts |
BTU (Total) 10,500 |
BTU (Heat) 7,600 |
BTU (Motor Load) 2,900 |
Water |
Weight (lb) | 340 |
---|---|
Height (in) | 34 |
Width (in) | 45 |