This HM Digital TDS meter is the AquaPro AP-1, a pen-style tester that shows total dissolved solids and water temperature at the same time. It reads 0 to 5000 ppm in 1 ppm steps with +/- 2% accuracy, and 0 to 80 C (32 to 176 F) for temperature. The water-resistant housing, data-hold button and auto-off make quick spot checks easy, and push-button digital calibration keeps it accurate. A cap and a CR2032 battery come in the box.
| Specification | Value |
|---|---|
| Brand | HM Digital |
| Model / item | AP-1 / HMDAP1 |
| TDS range | 0 to 5000 ppm (mg/L) |
| TDS resolution | 1 ppm |
| Accuracy | +/- 2% |
| Temperature range | 0 to 80 C; 32 to 176 F |
| Temperature resolution | 0.1 C/F |
| Calibration | Digital, push button; factory calibrated at 342 ppm NaCl |
| Conversion factor | NaCl, about 0.5 |
| Housing | Water-resistant |
| Battery | 1 x 3 V CR2032 button cell, included |
| Size | 5.9 x 1.1 x 0.5 in |
| Included | Cap and battery |
| Warranty | 1 year (listing) |
| Barcode | 891144000120 |
A TDS meter measures how much is dissolved in water, shown in parts per million, by reading the water's conductivity and converting it. For growers, that means checking source water before mixing, then confirming nutrient strength after. This AP-1 uses an NaCl factor of about 0.5. If you also need EC readings, the HM Digital COM-100 shows both. If you have any questions about this meter, contact us at support@groindoor.com or through chat.
Everything needed to confirm fit is on this page — add it to your cart to see delivered pricing for your address.
Remove the cap, switch the meter on and dip the end into the sample up to the immersion line, then stir gently and wait for the reading to settle. Press HOLD to freeze it before lifting the meter out. Rinse with clean water after each test and replace the cap. For round-the-clock reservoir readings instead of spot checks, see the HM-500 HydroMaster.
The AP-1 leaves the factory calibrated with a 342 ppm NaCl solution. Recalibrate with the push button in a known solution when readings start to wander.
No. It reads TDS and temperature.
One 3 V CR2032 button cell, included.
It is water-resistant; dip only the sensor end.
Total dissolved solids in water, in ppm, plus temperature on this model.
| UL Listed | No |
|---|---|
| Lead Time | This product ships in 1 Business Day |
| Prop 65 | No |
| EACH - Weight(lb) | 0.2 |
| EACH - Height(in) | 0.5 |
| EACH - Length(in) | 5.9 |
| EACH - Width(in) | 1.1 |
| Weight (lb) | 0.2 |
| Height (in) | 0.5 |
| UPC | 891144000120 |
| Width (in) | 1 |
| Brand | HM Digital |
| SKU | HMDAP1 |
| Warranty | 1 Year |